To properly install Stair treads, stair risers or landing tiles, you will need to adhere them to the step. Tacking them down will not only damage the product, but will void any warranty. For a proper stair tread installation, you will also need to use an epoxy nose caulk to help prevent the nose from cracking.
#400 Neoprene contact Cement
A quick-drying solvent-based contact cement for bonding rubber or vinyl stair treads, stair risers or landing tiles to wood, concrete, metal, marble, ceramic tile and many more surfaces.
Product Specifications
- Solvent-based contact cement - hazardous waste charge applies for shipping
- Bonds rubber or vinyl to: wood, concrete, metal, marble, ceramic tile
- Coverage: 75 square feet per gallon of adhesive.
- Available sizes: 1 qrt can, 1 gal can or 4 gal pail
- Use: Brush on both surfaces
- MSDS
|
-
#300 Stair Tread Adhesive
A water-based contact adhesive. Use to bond rubber or vinyl stair treads, stair risers or landing tiles to wood, concrete, metal or marble.
Product Specifications
-
Water-based contact adhesive
-
Bonds rubber or vinyl to: wood, concrete, metal or marble
-
Coverage:
-
Available sizes: 1 qrt can, 1 gal can or 4 gal pail
- Use:
- MSDS
|
-
#560 Rubber Flooring Adhesive
Environmentally Friendly
A latex adhesive for rubber stair treads, stair risers or landing tiles to wood or cement. Not recommended for places with excessive moisture.
Product Specifications
- Latex adhesive
- Bonds rubber to: wood or concrete
- Coverage: 150 square feet per gallon of adhesive.
- Available sizes: 1 gal can or 4 gal pail
- Use: brush on, single coat
- MSDS
|
-
#110 Epoxy Nose Caulk
Environmentally Friendly
Epoxy Nose Caulking should be used on all stair tread installations. This two part Epoxy Caulk provides the needed support underneath the nose of a stair tread. It can also be used to repair a worn stair surface.
Available in quart units or in 13-1/2 oz Dual-Cartridge unit that mixes in nozzle as caulk is dispensed. Dual Cartridge must be dispensed with the ECD18 dispensers.
Product Specifications
- Two part Epoxy Nose Caulking
- Expands to supply support at tread nosing to prevent cracks
- Coverage: quart units cover approx. 75 linear feet, Dual-Cartridge unit covers approx. 50 linear feet
- Use: when using the quart units, mix both parts together and install with a trowel. When using the Dual-Cartridge units, must install with the ECD18 dispenser.
- MSDS: Part A, Part B
|
If you have any questions or would like assistance in selecting the correct adhesive for your job, please feel free to call us at 888-432-2657, email sales@floormatstore.com or submit a detailed inquiry. You may also find our installation guide and frequently asked questions pages helpful.
Please be informed, our stair tread products supplier requires that we
charge a $10 handling fee on all orders less than $100 material cost.
Discount Floor Mat Store
Cleveland, OH 44236
-
888-432-2657
|
