GG3 Cart Bumpers are protective bumpers for walls, displays, doors, reception desks... just about anywhere you'll be needing bump protection. Made from a minimum 93" pre-consumer polycarbonate waste and is 100% recyclable. It's also pretty strong, in fact, it exceeds the impact performance of high impact PVC bumpers by 30% and ABS by 64%.
Product Features:
- SCS certified to be constructed of a minimum 93% pre-consumer polycarbonate waste.
- 100% recyclable
- 100% chlorine free (Vinyl free, PVC free)
- Stronger than similar PVC and ABS bumpers by up to 64%
- If incinerated rather than recycled, GG3 wall bumpers will not emit hazardous dioxins.
- Weighs 10% less than similar PVC bumpers, which cuts down on transportation fuel costs.
- Available in 16 stock colors, ready to ship out same or next day
Specifications | Color Chart | Pricing | Line Drawings | Installation
|
|
Rolled Rubber Athletic Flooring
Similar Products:
Green Product |
|
Please Note: While these bumpers may only weigh 4lbs per 12' section,
they are too long to ship UPS or FEDEX and must ship LTL Freight. We can
cut these down to 6' sections for you at $6 a cut, in order to chip by UPS.
Please Note: Due to complications beyond our control, a valid tax exempt
form is required for all orders involving GG1, GG2 and GG3 Wall Bumper Guards.
Online ordering is not yet available for this product, to place an order, please
call or email our sales team: 330-650-5561 / sales@floormatstore.com.
| Product Description |
Unit |
Price |
GG3 Mount & Bumper |
12' Section |
$50.00 |
| GG3 Mount & Bumper |
2 pieces 6' |
$56.00 |
| GGE-35 Rounded End Cap |
Each |
$5.00 |
| GGC-35 Outside 90°Corner |
Each |
$7.00 |
Product Specifications:
- Dimensions: 12' length, 3 " height, .9 " depth
- Material: Made with minimum 93% pre-consumer polycarbonate waste
- Model Numbers:
- Mounting base: GGB-35-400
- Rigid Top: GGT-35
- Snap-on End Cap: GGE-35
- Snap-on 90° Outside Corner: GGC-35
- Available Colors: Ready to ship within 48 hours after approval. Custom colors are available - 2000' minimum, 6-8 weeks for delivery.
- Black (Pantone Black 2 2X)
- Silver (Pantone 877C)
- Gray (Pantone 430C)
- Steel Gray (Pantone 425C)
- Light Caramel (Pantone 465C)
- Brown (Pantone 1545C)
- Red (Pantone 1797C)
- Beige (Pantone 4685)
- Deep Blue (Pantone 296C)
- Blue (Pantone 293C)
- Putty (Pantone 452C)
- Sapphire (Pantone 2943
|
|
|
Installation:
- Measure and cut the black base track to the desired length.
When wrapping around a corner, be sure to cut to fit flush with the edge of the wall.
When using end caps, cut the base track 1 " short per end cap.
Make sure to place screws 1/4" away from the ends of the base track.
- Snap the end caps and/or corner guards into place on the base track and screw in using #8 flat head philips screws.
- Measure and cut the bumper cover to fit flush between the end caps or corners.
Hinge the top hook edge of the bumper on the bace track and snap into place either by hand or with a rubber mallet. If by mallet, it is reccomended to place a cloth around the mallet to prevent marring.
|
|
